Product may have different configuration than the one in the pictures.

Sizing

The Guv'Nor comes in four frame sizes shown below, followed by their corresponding inside leg length range and stand-over height:

Frame Size	Inside Leg Lengh	Stand-over height
20" *	27-31"	29.5"
20.5"	29-33.5"	31.5"
22.5"	31-35.5"	33.5"
24.5"	33-37.5"	35.5" (DTT)

*20" frame is fitted with 26" wheels.

The frame size is the distance between the centrepoint of the cycle's bottom bracket (where the pedal arms extend from) and the top of the frame's seat tube (where the seatpost enters the frame).

Leg length should be measured from the sole of your foot to the inner top of your thigh (in inches) - please note that this is a different measurement to your trouser inside leg length. If your inside leg length falls in-between two frame sizes and you are unsure which size is best for you, please visit the Sizing Page for further guidance.

Sizing Info can be found here:   

DTT stands for 'double top-tube', where an additional top-tube has been added to the frame.

The stand-over height is the height from the ground to the top of the top-tube. The Guv'nor has a higher than average top-tube ("stand-over") and bottom bracket height. If your inside leg is at the lower end of a frame-size range, you may need to support yourself on tip-toe when stopping on your bicycle.

---

Iconic Path Racer frame with dynamic riding position 

Authentic 1930s frame with long stable wheelbase and relaxed steering geometry, suited to speed cycling as well as longer day rides. The frame is hand-built using 100 year old traditional methods - with original lightweight Reynolds 531 tubing hand-brazed into lugs - for the attention to detail that only a frame crafted by hand can possess. With traditional tubular crown forks and specially formed D section stays.

Picture by Sebastian Moise for the Dandy Run II (2016)

.